Alpha Romeo Mito
ALPHA ROMEO Mito
Contents of the full kit 26 items and 4 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.
1-11 * – These items adhere to the recesses under the bonnet lid, by their shape.
12* – This adhere to the bulkhead
INTERIOR OF VEHICLE
13 & 14 – Undo the carpet kick strips by the doorsills and lift the carpets to gain access to the footwells. Place these items under the carpets in the front footwells. Items 13 drivers side and item 14 passenger side.
15 & 16 – Follow the same procedure as for the front floors but fit these items to the rear floors and under the rear of the front seats.
17 – Lift out the rear seat and place this item under.
18* – Adhere this piece to the back of the rear seats
19 & 20* – These adhere to the rear wheel arches
21- 24* – These adhere to the side walls of the spare wheel
25* – This piece adheres to the base of the spare wheel
26 – This pad fits above the spare wheel and under the boot carpet
Four pads are included free of charge with the kit for fitting to the outer skin of the door. Do not attempt to fit these unless you are competent at removing door cards – seek advice from your dealer to ensure you don’t disconnect any electrical wires
The Fitting is now Complete