Contents of the full kit 16 items and 4 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.
1-3* – These items adhere to the recesses under the bonnet lid, by their shape.
4-5* – These items adhere to the bulkhead
INTERIOR OF VEHICLE
6&7 – Undo the carpet kick strips by the doorsills and lift the carpets to gain access to the footwells. Place these items under the carpets in the front footwells. Items 6 drivers side and item 7 passenger side.
8&9 – Follow the same procedure as for the front floors but fit these items to the rear floors and under the rear of the front seats. Item 8 drivers side and item 9 passenger side.
10&11 – Place these items under the rear seats.
12&13* – Remove the rear wheel arch covers and these items adhere to the wheel arches, items 12 drivers side and item 13 passenger side. Re-fit the wheel arch covers over the soundproofing.
14* – This items adheres to the floor of the spare wheel well
15 – Place item 15 to the front end of the boot.
16 – This items fits above the spare wheel and on the boot floor under the existing floor covering.
Remover the interior door trim panels and fit the pads to a clean surface on the door skin. Re-fit the interior trim panels.
The Fitting is now Complete