AUDI A3 May 2003 Onwards
AUDI A3 May 2003 onwards
Contents of the full kit 10 items and 15 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.
1-3 * – These items adhere to the recesses under the bonnet lid, by their shape.
INTERIOR OF VEHICLE
4 & 5 – Fit these pads under your drop in carpet and on top of your fixed carpets
6 & 7 – Follow the same procedure as for the front floors but fit these items to the rear floors.
8 – This piece fits under the rear seat.
9* – Adhere this piece under the spare wheel
Pads – Adhere 5 pads around the side walls of the spare wheel well
10 – Place this piece on the boot floor under the existing carpet above the spare wheel
Pads – Loosen the plastic trim and fit 3 pads to each rear wheel arch (you may need to ask you dealer for information on how to do this)
Remove the interior door trim panels and fit the pads to a clean surface on the door skin. Re-fit the interior trim panels. (Seek advice from your dealer on how to remove the door card)
The Fitting is now Complete