Contents of the full kit 11 items and 15 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.
1-4* – These items adhere to the recesses under the bonnet lid, by their shape.
INTERIOR OF VEHICLE
6 & 6 – Fit these pads under your drop in carpet and on top of your fixed carpets
7 & 8 – Follow the same procedure as for the front floors but fit these items to the rear floors.
9 – This piece fits under the rear seat
10* – Adhere this piece under the spare wheel
Pads – Adhere 5 pads around the side walls of the spare wheel well
11 – Place this piece on the boot floor under the existing carpet above the spare wheel
Pads – Loosen the trim and fit 3 pads to each rear wheel arch ( you may need to ask you dealer for information on how to do this)
Remove the interior door trim panels and fit the pads to a clean surface on the door skin. Re-fit the interior trim panels. ( Seek advice from your dealer on how to remove the door card)
The Fitting is now Complete