Default welcome message to get attention!

Order Direct By Phoning 0161 652 7080 Or Vist Our Online Shop All products are UK manufactured

Shop Now!

BMW 3 SERIES E90 2005 TO 2012

BMW 3 SERIES E90 2005 TO 2012

Contents of the full kit 13 items and 8 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.

ENGINE COMPARTMENT
No patterns taken for the bonnet

INTERIOR OF VEHICLE
1 – This pad fits under the drop in carpet and on top of the cab carpet .
2 – This pad fits under the passenger side carpet – you may find it easier to cut this pad into two pieces for ease of fitting
Lift out the rear seat
3 & 4 – Follow the same procedure as for the front floors but fit these items under the carpet in the rear of the front seats.
5 – Place item 5 under the rear seats. Refit all carpets and kick strips.

BOOT COMPARTMENT
Pads Undo the wheel arch covers and fit pads around the wheel arches because of the wiring on the arches you may have to trim the pads
The base plastic cover is NOT removable so fit
6 & 7 – These drop into the base of the plastic cover
8 – Place item 8 on the boot floor and then re-fit the original floor covering on top of the soundproofing.

DOOR PADS

Remove the interior door trim panels and fit the one pad to a clean surface on the inner skin of each door. Re-fit the interior trim panels.

 

The Fitting is now Complete
Happy Motoring!!!