BMW 3 SERIES
BMW 3 SERIES
Contents of the full kit 15 items and 6 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.
1-3 * – Fit these items to the recesses under the bonnet lid. Fit one pad to each suspension tower. Slight adjustments may be necessary, use a stanley knife or similar single blade cutter.
INTERIOR OF VEHICLE
4&5 – Remove the carpet kick strips by the doorsills and lift the carpet to gain access to the front footwells and up the side of the transmission tunnel. Item 4 divers side and item 5 passengers side.
6&7 – Follow the same procedure as for the front floors but fit these items under the carpet in the rear of the front seats. Item 6 drivers side and item 7 passengers side.
8 – These piece fit under the rear seat.
Refit all carpets and kick strips.
9&10* – Fit these items to the rear wheel arches in the boot, they fit under the arch covers.
11* – Remove the boot floor carpet and the spare wheel. Place this item in the spare wheel on the top of the soundproofing.
12 – Place item 11 on the boot floor and then re-fit the original floor covering on top of the soundproofing.
13&16* – These adhesive backed items fit to the recesses under the boot lid (by their shape).
Remove the interior door trim panels and fit the pads to a clean surface on the inner skin of each door (2 door model- fit 2 pads to each door). Re-fit the interior trim panels.
The Fitting is now Complete