Contents of the full kit 14 items and 4 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.
1 – 4 * – Remove the manufacturers under bonnet cover. These items fit to the bonnet lid by their shape. Re-fit the manufactures cover.
5&6* – These item fits to the wheel arches in the engine compartment. Item 5 to the passengers side and item 6 to the drivers side.
7&8 – Undo the carpet kick strips by the door and slide these pads under the existing carpets under the front foot wells. Item 7 to the driver’s side, item 8 to the passenger side.
9&10 – Follow the same procedure as for the front footwells but fit these to the rear of the front seats Item 9 to the drivers side and item 10 to the passengers side. Re-fit the carpets and kick strips.
11 – Place item 11 under the rear seat.
12&13 * – These items adhere to the rear wheel arches in the rear wheel compartment. Item 12 to the drivers side and item 13 to the passengers side.
14 – Place item 14 on the boot floor under the existing floor covering.
14 * – This item adheres to the boot floor under the spare wheel.
Remove the interior door trim panels and fit the pads to clean surface on the inner skin of each door. Re-fit the interior trim panels.
THE FITTING IS NOW COMPLETE