Honda Aerodeck 1984/89
Honda Aerodeck (1984/89)
Contents of the full kit 31 – items plus 4 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.
1-14* Adhere these items to the recesses by their shape under the bonnet lid
15* This item fits to the top rear of the bulkhead on the passengers side.
16* Fit item 16 on the centre bulkhead, passengers side.
17* Item 17 fits to the passengers side suspension tower.
18* This item fits to the side of the suspension tower on the passengers side.
19* Fit item 19 to the passengers side inner wing.
20* Item 20 fits to the top rear bulkhead on the drivers side.
21* Fit item 21 on the centre bulkhead, drivers side.
22* Item 22 fits to the drivers side suspension tower.
23&24 Undo the carpet kick strip by the door sills and lift the front floor carpets to gain access to the footwells. These items fit under the carpets. Item 23 on the passengers side front floor and item 24 on the drivers side
25&26 Follow the same procedure as for the front floors, but fit these items in the rear footwells and also under the rear of the front seats. Item 25 to the drivers side and items 26, passengers side.
27 Place these items under the rear seats.
28&29* Remove the boot floor carpets, the spare wheel and the rear wheel arch covers. Fit item 28 and 29 to the rear wheel arches. Item 28 drivers side and item 29, passengers side.
30 Place item 30 in the spare wheel recess. re-fit the wheel on top of the soundproofing.
31 Place item 31 on the boot floor. Re-fit the wheel arch covers and the boot floor carpets.
Fit one pad to the outer skin of each door after removing the trim
NOW YOUR FITTING IS NOW COMPLETE