Hyundai Pony X2
HYUNDAI PONY X2
Contents of the full kit 24 items and 4 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We reccomend the use of a small roller to apply even pressure.
1- 11 * These adhere to the bonnet lid by their shape
12-13* These items fit to the suspension towers in the engine compartment. Item 12 to the passengers side and item 13 to the drivers side.
14* Item 14 adheres to the centre of the bulkhead.
INTERIOR OF CAB
15 Remove the centre console and place item 15 around the gear stick. Re-fit the centre console.
16-17 Remove carpet kick strips by the doorsills and lift the front floor carpets to gain access to the footwells. Place item 16 passengers side and item 17 at the drivers side.
18-19 Follow the same procedure as for the front floors, but place these items under the carpet in the rear footwells and also under the of the front seats. Item 18 at the passengers side and item 19 on the drivers side.
20 Place item 20 under the rear seats.
21 Place item 21 under the spare wheel.
22-23* These items adhere to the rear wheel arches in the boot area. Remove the wheel arch covers and fit item 22 to the passengers side wheel arch and 23 to the drivers side wheel arch. Re-fit the wheel arch covers over the soundproofing
24 Place item 24 on the boot floor under the existing floor covering.
Remove the interior door trim panels and fit two pads to a clean surface on each door skin. Re-fit the interior trim panels to each door.
THE FITTING IS NOW COMPLETE