Hyundai S Coupe
HYUNDAI S COUPE
Contents of the full kit 28 items and 4 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We reccomend the use of a small roller to apply even pressure.
1- 9 * These adhere to the bonnet lid by their shape
10-11* These items fit to the suspension towers in the engine compartment. Item 10 to the passengers side and item 11 to the drivers side.
INTERIOR OF CAB
12 Remove the carpet kick strips by the doorsills and lift the front floor carpets to gain access to the front footwells and transmission area. Place item 12 under the carpet, around the front of the transmission tunnel.
13-14 Place these items under the carpets in the front footwells. Item 13 to the drivers side and items 14 to the passengers side.
15 Follow the same procedure as for the front floors, but also undo the seat belt anchors in the rear footwell area. Place item 15 under the carpet, and over the central of the transmission area, in the rear footwell area.
16-17 Place these items under the carpets in the rear footwells, and also under the rear of the front seats. Item 16 to the drivers side and item17 to the passengers side.
18 Place item 18 under the rear seats.
19 Remove the boot floor carpet and the spare wheel. Place item 19 in the spare wheel recess and then re-fit the wheel on top of the soundproofing.
20-21* Remove the wheel arch covers and fit these items to the rear wheel arches. Item 20 to the driver side and item 21 to the passengers side.
22 Place item 22 on the boot floor and then re-fit the boot carpet on top of the soundproofing.
23-28* Fit these items to the recesses under the boot lid, their shape.
Remove the interior door trim panels and fit two pads to a clean surface on each door skin. Re-fit the interior trim panels to each door.
THE FITTING IS NOW COMPLETE