Jeep Patriot 2009
JEEP Patriot 2009
Contents of full kit 22 items and 4 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.
ENGINE BAY
1 – 4* Adhere these items to the bonnet lid by their shape
INTERIOR OF CAB
Loosen the trim from the transmission tunnel to fit items 5 to 8
5 This item fits under the carpet in the driver’s side foot well
6 This item fits on the side of the transmission tunnel drivers side
7 This item fits under the passenger side front carpet
8 This item fits along the side of the transmission tunnel passenger side
Undo the bolts holding the rear seat frame and slide pads under rear footwell carpet
9 & 10 These fit under the rear carpets
11 This item fits under the rear seat
LOAD SPACE
12* This piece adheres to the boo floor top left
13* This piece adheres to the middle top of the boot floor
14* This piece adheres to the top right of the boot floor
15* This piece adheres to the lower left side of the boot floor
16* This piece adheres to the lower right side of the boot floor
17-20* These pieces adhere to the side walls of the spare wheel well
21* This piece adheres to the base of the spare wheel well
22 This piece fits on top of the spare wheel and under the boot carpet
DOORS
Fit one pad to the outer skin of each door only if your are experienced at removing the door card. Seek advice from your dealer as to how the door card is constructed
THE FITTING IS NOW COMPLETE
!!!Happy Motoring!!!