Land Rover 90
LAND ROVER 90
Contents of the full kit 26 items and 3 pads
Td5 model 26 items and 4 pads
Td 5 model (no bulkhead) 31 items and 4 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure
Underbonnet
1 – 5 * These items adhere to the bonnet lid by their shape.
1-3* The Td5 has only three items
Interior Cab
4 & 5* These adhere to the sides of the foot well TD5 model only
6 & 7 * These items adhere to the bulkhead 7 to the drivers side
8 * This item adheres around the gear stick onto the transmission tunnel
9 & 10 * These items adhere to the bell housing covering On Td5 model item 10 is replaced by a pad because of the bonnet catch fitting
11 & 12 * These items adhere to the front of the seat boxes 11 to the drivers side
13 & 14 * These items adhere to the side of the seat boxes 13 to the drivers side
15 & 16 These pads fit in the front foot wells
17 18 19 These pads fit under the seats
Rear Cab
20 & 21 * These items fit to the side and tops of the rear wheel arches 20 to the drivers side
22 & 23 * These items adhere to the recessed area above the wheel arch
24 This pad fits on the floor under the carpet or rubber mat.
25 & 26* These adhere to the rear light covers. 26 to the drivers side
On TD5 models with no bulkhead
27 & 28* These adhere to the front of the rear wheel arches
29, 30 &31* These adhere under the jack and wheel brace behind the front seats
Pads
Fit a pad to the outer skin of each door
The Fitting is now Complete
Happy Motoring