Let us help, call us now on: 0161 652 7080

Order Direct By Phoning 0161 652 7080 Or Vist Our Online Shop All products are UK manufactured

Shop Now!

Range Rover (Classic)

RANGE ROVER (Classic)

Contents of the full kit 27 items and 6 pads

Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure

Engine Compartment

1 – 5* These items adhere to the bonnet lid

1 to the left side of the bonnet 2 to the second left panel 3 to the centre panel 4 to the right of centre 5 to the right side of the bonnet.

6 –9* These items adhere to the bulkhead. 6 to the drivers side bulkhead, 7 to the top of centre bulkhead 8 under the heater intake top of bulkhead, 9 to the passenger side centre bulkhead.

Interior Compartment

10&11 Undo the carpet kick strips by the door and slide these pads

along the side of the transmission tunnel under the carpet

12 Fits around the gear stick under the trim

(on a 2 door 10,11 &12 are one piece)

13&14 These pads fit in the front footwells under the carpet 13 to the passenger side.

15& 16 These pads fit under the front seats

17 This item fits on the rear floor

18 * This item adheres to the vertical wall of the rear seat

19 & 20* These items fit to the vertical wall near the door

Load space area

TILT THE REAR SEAT FORWARDS AND REMOVE THE TOOLS AND JACK

21& 22* Remove the spare wheel and fit these items to the inner rear wing on the passenger side 21 to the wing 22 to the wheel arch

23* Adheres to the drivers side inner wing

24 & 25* These adhere to the rear light 24 to the driver’s side

26 Place this item under the rear load space carpet

27 * Remove the rear tailgate and adhere this to the tail gate outer skin

28 & 29* These adhere to the rear wheel arches

Pads

Fit one pad to the outer skin of each door

Fit one pad to the top of the rear area of the rear wheel arch

THE FITTING IS NOW COMPLETE

Happy Motoring