Contents of the full kit: 3 items
Items marked with an * are self-adhesive and should be applied to clean and dry surface only. We reccomend the use of a small roller to apply even pressure.
Up to 2005
1-2 * These items adhere to the bonnet lid behind the manufacturers cover.
1 – 8* These items adhere to the bonnet lid by their shape
Because the floor under the carpets is not flat we suggest fitting the floor mats on top of the floor carpet and under the drop in manufacturers carpets
9 This mat fits under the driver’s side
10 This mat fits on the passenger side
11 & 12 These fit in the rear foot wells
13* Adhere this piece to the floor of the spare wheel well
14 & 15* These adhere to the side walls of the spare wheel well
16* This piece adheres to the back wall of the spare wheel well
17* This piece adheres to the side floor of the boot on the passenger side
18 This piece fits above the spare wheel and under the boot carpet
Fit a pad to the outer wing by opening the flap on the drivers side behind the wheel arch also adhere a pad to the wheel arch, It is not possible to do this on the passenger side unless you remove all the jack and other items – we include two pads for the enthusiast with time to do this
The kit also includes 4 door pads to fit these you will need to remove the door card – we suggest you obtain a blow up sketch of the door construction from your dealer unless you are experienced at removing door cards.
The Fitting is now Complete