Mercedes E Class 2002-2009
MERCEDES E CLASS 2002 to 2009
Fitting Instructions (W211)
Contents of full kit: 22 Items and 16 Pads
Items marked with an * are self-adhesive and should be applied to clean and dry surface only. We recommend the use of a small roller to apply even pressure.
1-10* Remove the manufacturers underbonnet cover (if fitted to your model). Fit items 1-10 to the recesses under the bonnet lid. Re-fit the manufacturers cover (if applicable)
INTERIOR OF VEHICLE
Because the interior carpets are ridged underneath it is best to place the interior floor piece under the manufacturers drop in carpets
11 & 12 Item 11 fits under the driver’s side drop in carpet and 12 under the passenger side
13 & 14 Do the same with the rear footwell carpets
15 & 16 These items fit under the rear seat
17* This piece adheres to the floor of the spare wheel well.
18* This piece adheres to the left side of the spare wheel well
19* This piece fits to the area behind the spare wheel
20* This piece fits on the floor just before the rear seat
21* This piece fits on the back of the rear seat
22 This piece fits above the spare wheel cover and under the boot carpet.
Remove the covering of the rear wheel arches
Fit 5 pads onto each rear wheel arch under the manufacturers rubber cover. Also fit a pad onto the side wing at the same time
Remove the interior door trim panel and fit the pads to a clean surface on the door skin. Re-fit the interior trim panels (only fit these if you have access to the manufacturers manual)
The Fitting is now Complete