Mercedes SL 320

MERCEDES SL 320

Contents of full kit: 11 Items and 16 Pads

Items marked with an * are self-adhesive and should be applied to clean and dry surface only. We recommend the use of a small roller to apply even pressure.

ENGINE COMPARTMENT

1-4* Remove the manufacturers underbonnet cover (if fitted to your model). and adhere these pieces to the single skin area of the bonnet lid

INTERIOR OF VEHICLE

5 & 6 Item 5 fits under the driver’s side carpet and 12 under the passenger side

7 & 8 Do the same with the rear footwell carpets

9 These items fit under the rear seat

BOOT COMPARTMENT

10* This adheres to the floor of the spare wheel

11 This piece fits above the spare wheel cover and under the boot carpet.

PADS

Remove the covering of the rear wheel arches

Fit 5 pads onto each rear wheel arch under the manufacturers rubber cover. Also fit a pad onto the side wing at the same time

Remove the interior door trim panel and fit the pads to a clean surface on the door skin. Re-fit the interior trim panels (only fit these if you have access to the manufacturers manual)

The Fitting is now Complete

HAPPY MOTORING