MITSUBISHI CARISMA – Fitting Instructions
Contents of the full kit 23 items and 4 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.
1–13* These items adhere to the bonnet lid by their shape.
14* This item adheres to the centre of the bulkhead
INTERIOR OF VEHICLE
15&16 Remove the carpet kick strips by the doorsills and lift the carpets to gain access to the footwells. Place these items under the carpets on the front floors. Item 15 driver side, item 16 passenger side
17&18 Follow the same procedure as for the front floors but fit these items under the carpets in the rear footwells and also under the rear of the front seats. Item 17 driver side, item 18 passenger side
19 Place this item under the rear seats
20 This item fits under the spare wheel
21&22* Remove the rear wheel arch covers and these items adhere to the wheel arches. Item 21 passenger side, item 22 driver side. Re-fit the wheel arch cover over the soundproofing
23 This item fits on the boot floor under the existing floor covering
Remove the interior door trim panels and fit the pads to a clean surface on the inner skin of the doors. Re-fit the interior trim panels
THE FITTING IS NOW COMPLETE