Let us help, call us now on: 0161 652 7080

Order Direct By Phoning 0161 652 7080 Or Vist Our Online Shop All products are UK manufactured

Shop Now!

Mitsubishi Galant 1996

MITSUBISHI GALANT 1996 – Fitting Instructions

Contents of the full kit 24 items and 4 pads

Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.

ENGINE BAY

1– 12 * These items adhere to the bonnet lid by their shape.

INTERIOR OF VEHICLE

13&14 Remove the carpet kick strips by the doorsills and lift the carpets to gain access to the footwells. Place these items under the carpets on the front floors. Item 13 driver side, 14 along the side of the transmission tunnel

15 &16 These items fit under the carpet on the passenger side

17 & 18 Follow the same procedure as for the front floors but fit these items under the carpets in the rear footwells and also under the rear of the front seats.

19 Place this item under the rear seat

BOOT COMPARTMENT

20 & 21* Remove the rear wheel arch covers and fit these items on to the rear wheel arches. Item 21 passenger side, item 20 driver side. Re-fit the covers over the soundproofing

22* This item fits under the spare wheel

24 This item fits on the boot floor under the existing floor covering

PADS

Remove the interior door trim panels and fit the pads to a clean surface on the inner skin of the doors. Re-fit the interior trim panels

THE FITTING IS NOW COMPLETE