Ford Connect Rear Section 2002 to 2012 Onwards
2002 to 2012 Onwards Ford Connect Rear Section
Kit consists of 15 items and 18 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure
A Remove any side panels ( ie ply linings)
B Remove flooring held down by load supports and door trims
C Remove the plastic wheel arch covers.
Fit pieces as follows
Wheel Arches
1 * Adhere these pieces to the driver`s side rear wheel arch
2 -4* Adhere these pieces to passenger wheel arch
Roof
5 &6* These adhere to the front roof section
7 & 8* These adhere to the rear roof back section
Lower Side Walls
Pads (18) Adhere a pad to all the single skin areas of the lower (below what would be window level)
4 pads each side front section
3 pads rear section above wheel arch
2 pads each rear door
Upper Sides
9 & 10** These adhere to the front upper sides
11 -14* These adhere to the rear upper sides
Floor
15 This piece fits under raer load space floor Customer to trim to size