Let us help, call us now on: 0161 652 7080

Order Direct By Phoning 0161 652 7080 Or Vist Our Online Shop All products are UK manufactured

Shop Now!

VW T5/T6 (Front Cab)

VW T5/T6 (Front Cab)

Contents of the full kit 16 items and 1 blanket and 12 pads

Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.

Under bonnet

1 – 8* These items adhere to the bonnet lid by their shape. The manufacturer’s cover can go back over the soundproofing.

NB Facelift models from 2010 onwards only have 6 bonnet pieces and T6 models only have 3 bonnet pieces so will have less items in the kit.

Blanket Fit the blanket over and down the back of the engine. 2010 onwards and T6 models have special slots in the blanket to avoid pipes and enabling the blanket to fit better.

Interior Cab

Undo the foot well cover on the driver side and fit two pads to the metal sides of the well.

9* This piece adheres to the drivers side front wheel arch.

10* This piece adheres to the suspension strut above item 9.

Adhere one pad to the metal face of the driver’s side foot rest.

11 This pad fits under the floor covering on the driver’s side.

Undo the foot well cover on the passenger side and fit two pads to the metal sides of the well.

12* This piece adheres to the passenger side front wheel arch.

13* This piece adheres to the suspension strut above the item 12.

14 This pad fits under the passenger side floor covering.

15 This piece fits under the floor covering between the seats trim to fit around handbrake.

Adhere three pads to the centre transmission tunnel sides

16 This piece fits in the upper centre of transmission floor

Doors

Adhere two pads to the outer skin of each door.

On some models the door is double skin and to remove the inner skin will take a long time and it is not advisable to fit pads unless you have a lot of time to spare.

The fitting is now complete Happy Motoring!!!