NISSAN BLUEBIRD – Fitting Instructions
Contents of the full kit 27 items and 4 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.
1-12* These items adhere to the recess under the bonnet lid by their shape
13&14* These items adhere to the suspension towers in the engine bay. Item 13 driver side, item 14 passenger side
15&16* These items adhere to the sides of the suspension towers
17* Item 17 adheres to the lower bulkhead on the passenger side
18&19* These items adhere to the centre bulkhead. Item 18 passenger side, item 19 driver side
20* Item 20 adheres to the lower bulkhead on the driver side
INTERIOR OF THE VEHICLE
21&22 Remove the carpet kick strips by the doorsills and lift the carpets to gain access to the footwells. Place these items under the carpets in the front floors. Item 21 drivers side and item 22 to the passenger side.
23&24 Follow the same procedure as for the front floors but fit these items under the carpets in the rear footwells and also under the rear of the front seats. Item 23 drivers side and item 24 passengers side.
25 Place item 25 under the rear seats.
26 Place item 26 under the spare wheel.
27 Place item 27 on the boot floor under the existing floor covering.
Remove the interior door trim panels and fit the pads to a clean surface on the inner skin of each door. Re-fit the interior trim panels.
THE FITTING IS NOW COMPLETE