Nissan Juke 2010 Onwards
NISSAN JUKE 2010 onwards
Contents of the full kit 23 items and 6 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.
1-5* These items adhere to the bonnet lid by their shape
INTERIOR OF THE VEHICLE
6 & 7 Remove the carpet kick strips by the door sills and lift the carpets to gain access to the footwells. Place these items under the carpets in the front footwells. item 6 to the driver side
8 & 9 Unclip the plastic footwell trim by the door and lift the carpet – slide the pad into the area under the carpet ( you may need to fold the sound proofing then flatten it out when it is in the footwell)
10 Lift out the rear seat and fit this pad onto the base also adhere 1 pad either side of piece No 10
11 & 12* These adhere to the front upright of the rear seat frame
13 &14* These pieces adhere to the rear drivers side wheel arch under the carpet No 13 to the front section 14 to the rear section
15 & 16* These adhere to the passenger rear wheel arch
17,18,19* These adhere to the side walls of the spare wheel well
20* This adheres to the base of the spare wheel well
21 & 22* These pieces adhere to the floor of the boot either side of the spare wheel
23 This piece fits under the boot carpet and over the spare wheel
Remove the interior door trim panels and fit the pads to a clean surface on the door skin. Re-fit the interior trim panels.
NB Do not try to fit the door pads unless you have experience of how the door card is fitted. If in doubt your garage parts dept should have a blow up of the door fitment.
THE FITTING IS NOW COMPLETE