Let us help, call us now on: 0161 652 7080

Order Direct By Phoning 0161 652 7080 Or Vist Our Online Shop All products are UK manufactured

Shop Now!

Nissan Micra 2010 Onwards

NISSAN MICRA  2010 onwards

FITTING INSTRUCTIONS

Contents of the full kit 18 items and 8 pads

Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.

ENGINE COMPARTMENT

1-4* These items adhere to the bonnet lid by their shape

INTERIOR OF THE VEHICLE

5 & 6 Remove the carpet kick strips by the door sills and lift the carpets to gain access to the footwells. Place these items under the carpets in the front footwells. item 5 to the  driver side

7 & 8 Unclip the plastic footwell trim by the door and lift the carpet – slide the pad into the area under the carpet ( you may need to fold the sound proofing then flatten it out when it is in the footwell)

BOOT COMPARTMENT

Fold over the rear seats and then lie them flat this will allow you to fit piece No 9 under the rear seats

9 Fits under the rear seat

Remove the spare wheel and the rear wheel arch carpets

10 & 11 * These pieces adhere to the rear wheel arches

12- 15* These adhere to the sides of the spare wheel well ( they can overlap)

16* This piece adheres to the base of the spare wheel

DOORS

Remove the interior door trim panels and fit the pads to a clean surface on the door skin. Re-fit the interior trim panels.

NB Do not try to fit the door pads unless you have experience of how the door card is fitted. If in doubt your garage parts dept should have a blow up of the door fitment.

THE FITTING IS NOW COMPLETE

Happy Motoring