Nissan Sunny Hatch & Saloon (to 1992)
NISSAN SUNNY HATCH & SALOON (TO 1992)
Contents of the full kit 30 items and 4 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.
1-18* These items adhere to the recess under the bonnet lid by their shape
19* This item adheres to the centre of the bulkhead, in the engine bay.
20* This item adheres to the passenger side bulkhead
INTERIOR OF THE VEHICLE
21 Remove the transmission console and place this item around the gear stick. Re-fit the transmission console
22&23 Remove the carpet kick strips by the doorsills and lift the carpets to gain access to the footwells. Place these items under the carpets in the front footwells. Item 22 driver side, item 23 passenger side
24&25 Follow the same procedure as for the front floors but fit these items under the carpets in the rear footwells and also under the rear of the front seats. Item 24 driver side and item 25 passenger side
26` Place item 26 under the rear seats
27 Place item 27 under the spare wheel
28&29* These items adhere to the rear wheel arches in the boot area. Item 28 passenger side, item 29 driver side
30 Place item 30 on the boot floor under the existing floor covering
Remove the interior door trim panels and fit one pad to a clean surface on the inner skin of each door. Re-fit the interior trim panels.
THE FITTING IS NOW COMPLETE