Let us help, call us now on: 0161 652 7080

Order Direct By Phoning 0161 652 7080 Or Vist Our Online Shop All products are UK manufactured

Shop Now!

Renault 19

RENAULT 19 – Fitting Instructions

Contents of the full kit 17 items and 6 pads

Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.


1 – 4* Fit these items to the recesses under the bonnet lid, by their shape

5 & 6* These items fit to the top bulkhead  in the engine compartment. Item 5 to the centre and item 6 to the passenger side

Fit one pad to the side of each suspension tower. Warm the pad in your hand before fitting as this will make it more pliable for fitting


7 & 8 Remove the carpet kick strips by the door sills and lift the carpets sufficiently to gain access to the front floors. Slot these items under the carpets in the front footwells. Item 7 passenger side, item 8 driver side

9 & 10 Follow the same procedure as for the front floors but fit these items under the carpets in the rear footwells and also under the rear of the front seats. Item 9 driver side, item 10 passenger side

11 Item 11 fits over the centre transmission area in the rear footwell under the carpet

12 Place this item under the rear seat

Re-fit all carpet and kick strips


13 & 14* Fit these items on the back of the rear seats. Item 13 driver side, item 14 passenger side

15 & 16 These items fit to the rear wheel arches, under the wheel arch covers. Item 15 driver side, item 16 passenger side

17 Place item 17 on the boot floor under the existing floor covering


Remove the interior trim panel and fit the pads to a clean surface on the door skin. Re-fit the interior trim panels

The fitting is now complete

Happy Motoring