Let us help, call us now on: 0161 652 7080

Order Direct By Phoning 0161 652 7080 Or Vist Our Online Shop All products are UK manufactured

Shop Now!

Renault Clio 16 Valve

RENAULT CLIO 16 VALVE – Fitting Instructions

Contents of the full kit 15 items and 4 pads

Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.

ENGINE COMPARTMENT

1 – 4* Fit these items to the recesses under the bonnet lid by their shape 

5* Item 5 adheres to the centre bulkhead in the engine compartment

6* Item 6 adheres to the passenger side suspension tower

INTERIOR OF VEHICLE

7 & 8 Remove the carpet kick strips by the doorsills and lift carpet to gain access to the footwells. Fit these items under the carpets in the front floors. Item 7driver side, item 8 passenger side

9 & 10 Follow the same procedure as for the front floors but fit these items under the carpets in the rear footwells and also under the rear of the front seats. Item 9 driver side, item 10 passenger

11* Item 11 adheres to the back of the rear seats

12 Place item 12 under the rear seats

BOOT COMPARTMENT

13 & 14* These items adhere to the rear wheel arches in the boot area. Item 13 driver side , item 14 passenger side

15 Place item 15 on the boot floor under the existing floor covering

PADS

Remove the interior door trim panels and fit the pads to a clean surface on the door skin. Re-fit the interior trim panels

The Fitting is now Complete

Happy Motoring