Contents of the kit 16 items and 4 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.
1 – 6 * These items adhere to the recesses under the bonnet lid by their shape.
7* This item adheres to the inner wing near the suspension tower.
8* Adhere to inner wing behind the wheelbase.
9 This non-adhesive pad is fitted under the carpet on the driver side (it will be necessary to lift the trim at the door kick strips and lift the carpet to gain access).
10 follow the same procedure as item 9 but place to the passenger’s side of the foot well.
11&12 These items are fitted under the carpets in the rear foot well in the same way as items 9 and 10.
13 Place this item under the rear seats.
14 Place this item under the floor covering in the boot area.
15&16* These items adhere to the rear wheel arch item 15 drivers side and 16 passengers side.
Remove the interior door trim panels and fit the pads to a clean surface on the door skin. Re-fit the interior door trim panels.
The Fitting is now Complete