Let us help, call us now on: 0161 652 7080

Order Direct By Phoning 0161 652 7080 Or Vist Our Online Shop All products are UK manufactured

Shop Now!

Renault Traffic

RENAULT TRAFFIC – Fitting Instructions

Contents of the kit 33 items and 10 pads and 1 blanket

Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.

ENGINE BAY

1 – 18* These items adhere to the bonnet lid by their shape. Items 3-16 fit behind the open grid on the top end of the bonnet lid

19* This item adheres to the drivers side bulkhead

20* This item adheres to the drivers side bulkhead above the servo

21* This item adheres to the centre bulkhead

22* This item adheres to the passenger side centre bulkhead behind the fuel filter

23* This item adheres to the passenger side bulkhead behind the battery

24 & 25* These items fit to the inner wings of the engine bay. Item 24 driver side

Blanket Attach the blanket over the engine and as far down behind the engine as you can. Cable ties are provided to keep it in place, fasten these around the water pipe

INTERIOR CAB

26* This item adheres to the bell housing cover

27 & 28* These items adhere to the toe board, item 27 passenger side

29 & 30* These items adhere to the front suspension towers, item 29 passenger side

31 This pad fits under the driver’s side floor covering 

32 This fits under the passenger side floor covering

33 This pad fits under the driver’s seat

PADS

Fit two pads to the outer skin of each door and use the rest of the pads around the footwells and to the sides of the seat boxes

The Fitting is now Complete

Happy Motoring