Contents of the full kit 17 Items and 4 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only We reccomend the use of a small roller to apply even pressure.
1-3* These items adhere to the recess under the bonnet lid by their shape
4-6* Fit these items to the bulkhead. Item 4 to the top of the centre of the bulkhead, item 5 to the passenger side of the bulkhead and item 6 to the driver side bulkhead
7&8* These items adhere to the front inner wings. Item 7 to the drivers side and 8 to the passengers side
9&10* Fit these items to the sides of the suspension towers. Item 9 to the drivers side and 10 to the passengers side
INTERIOR OF VEHICLE
11&12 Remove the carpet kick strips by the doorsills and lift the carpets to gain access to the footwells. Place these items under the carpets on the front floors. Item 11 drivers side, item 12 passenger side.
13&14 Follow the same procedure as for the front floors but place these items under the carpets in the rear footwells and also under the rear of the front seats. Item 13 passenger side, item 14 driver side.
15 Place item 15 under the rear seats.
16 Place item 16 under the spare wheel
17 Place item 17 on the boot floor, under the existing floor covering
Remove the interior door trim panels and fit one pad to a clean surface on the inner skin of each door. Re-fit the interior trim panels
The Fitting is now Complete