Suzuki SJ413/ Samurai
Contents of the full kit 20 Items and 4 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We reccomend the use of a small roller to apply even pressure.
1-6 * These items adhere to the bonnet lid by their shape.
7 & 8 * 7 adheres to the passenger side bulkhead, 8 to the driver’s side behind the battery.
9* This item adheres to the vertical face of the inner wing, on the passenger side.
10 & 11* 10 adheres to the top of the passenger side inner wing, 11 to the driver’s side inner wing
INTERIOR OF VEHICLE
12 & 13 These fit along the side of the transmission tunnel
14 & 15 These fit under the front floor coverings.
16 & 17 * These adhere to the side of the front footwells 16 to the drivers side
18 & 19 These fit under the floor covering in the rear footwells
20 & 21 * Adhere these items to the rear wheel arches. 20 to the passenger side
22 Place this mat under the rear deck cover
Fit two pads to the outer skin of the door
The fitting is now complete