Suzuki Swift 1999 – 2004
SUZUKI SWIFT 1999 ONWARDS
Contents of the full kit 19 Items and 4 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We reccomend the use of a small roller to apply even pressure.
1-9 * These items adhere to the recess under the bonnet lid by their shape.
10&11* These items fit to the suspension towers. Item 10 driver side, item 11 passenger side
INTERIOR OF VEHICLE
12&13 Remove the carpet kick strips by the door sills and lift the carpet to gain access. Place these pads under the carpet. Item 12 driver side, item 13 passenger side
14&15 Follow the same procedure as for the front floors, but fit these items under the carpets in the rear floors and also under the rear of the front seats. Item 14 driver side, item 15 passenger side
16 Place item 16 under the rear seats
17&18* Remove the rear wheel arch covers (if fitted to your specific model) and fit these items to the wheel arches. Item 17 passenger side, item 18 driver side. Re-fit the wheel arch covers over the soundproofing (if applicable)
19 Place item 19 on the boot floor, under the existing floor covering
Remove the interior door trim panels and fit the pads to a clean surface on the inner skin of each door. Re-fit the interior trim panels
The fitting is now complete