Suzuki Swift 2010 Onwards
SUZUKI SWIFT 2010 onwards
Contents of the full kit 19 Items and 5 pads
Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We reccomend the use of a small roller to apply even pressure.
1-10 * These items adhere to the recess under the bonnet lid by their shape.
INTERIOR OF VEHICLE
11 & 14 Remove the carpet kick strips by the door sills and lift the carpet to gain access. Place these pads under the carpet. Item 11 driver side, item 14 passenger side
12 & 13 These items fit along the side of the transmission tunnel in the front footwells
Lift up the rear seat to gain access to the rear footwells
15 & 16 These pads fit under the rear carpet footwell
17 Place item 17 under the rear seats
18-21* These pieces adhere to the side walls of the spare wheel well
22* This piece adheres to the base of the spare wheel
Remove the rear wheel arch covers
23 & 24* These pieces adhere to the rear wheel arches
Pads Whilst the cover is off adhere a pad to the outer rear wing
25 Place item 19 on the boot floor, under the existing floor covering
Remove the interior door trim panels and fit the pads to a clean surface on the outer skin of each door. Re-fit the interior trim panels.
Do not fit these pads if you have electric windows unless you are competent at removing the door card see ask advice from you dealer
The fitting is now complete