Default welcome message to get attention!

Order Direct By Phoning 0161 652 7080 Or Vist Our Online Shop All products are UK manufactured

Shop Now!

V.W.Scirocco MARK 3

V.W.Scirocco MARK 3

2008 ON

Contents of the kit 17 items and 4 pads

Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.

ENGINE BAY

1- 4 * These items adhere to the bonnet lid by their shape

INTERIOR CAB

5 Undo the carpet kick strips by the door and lift the carpet. Slide pad 5 under the carpet. on the drivers side floor.

6 & 7 Item 6fits under the passenger side floor carpet and 7 fits along the side of the transmission tunnel

Unclip the rear seat and pull back the rear floor carpet

8 & 9 These pieces slide under the rear footwell carpets

10 This pad fits under the rear seat

BOOT AREA

11 & 12 * These items adhere to the rear wheel arches item 11 to the drivers side 12 to the passenger side. When refitting the carpet covering the wheel arches ensure the carpet goes behind the lower pin sticking out from the rear seat. There is a clip on the wheel arch carpet ensure you fasten this or the carpet will not fit properly when the rear seat moves

13 a b c * These item adheres to the boot floor under the spare wheel

14 15 16 * These adhere to the side walls of the spare wheel

17 This item fits under the boot carpet.

PADS

Fit two pad to the outer skin of each door – if you are not experienced at removing door cards ask your dealer for a blow up of the door construction

YOUR FITTING IS NOW COMPLETE