V.W. Tiguan 2009 onwards

V.W. Tiguan 2009 onwards

Contents of the full kit 12 items plus 9 pads

Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.

Engine Bay

1-2 * These items adhere to the bonnet lid underneath the manufacturers foam cover.

Interior Cab

3 Because of the accelerator pedal fitment this pad fits above the car carpet but under the drop in mat

4 This pad fits under the carpet on the passenger side

5 & 6 These items fit under the rear foot well carpet

7 and 8 These are slid in from the boot side to fit under the rear seat

Boot Section

9* This pad adheres to the driver’s side rear wheel arch

10* This adheres to the passenger side rear wheel arch

5 Pads Whilst fitting this piece adhere three pads to the outer wing and two pads to the outer side of the wheel arch

11* Adhere this piece to the boot floor

12 This piece fits under the boot carpet

Pads

Fit a pad to the outer skin of each door after removing the trim

Do not attempt this unless you are competent and removing trim. You may be able to get a blow up sketch of the door trim from your local dealer parts dept.