Items marked with an * are self-adhesive and should be applied to a clean and dry surface only. We recommend the use of a small roller to apply even pressure.
ENGINE BAY
1-6* These items adhere to the bonnet lid by their shape.
INTERIOR OF VEHICLE
7 These items fit under the driver’s side front footwell carpet. You will need to remove the footrest and trim at the side of the tunnel to pull the carpet away. The smaller rectangular piece will go in first under the front seat.
8 These items fit under the passenger side front footwell carpet in the same fashion at the driver’s side.
9&10 These pieces fit along the side of the transmission tunnel behind the trim/carpet. Fit these items at the same time as the front footwells.
11&12 These pieces slide under the rear footwell carpet. You will need to remove the rear seat first to gain access.
13 This item sits under the rear seat.
BOOT COMPARTMENT
14&15* These items adhere to the rear wheel arches, item 14 to the driver’s side.
16* This item adheres to the base of the spare wheel well.
17-21* These items fit around the side walls of the spare wheel well.
22 This item sits above the spare wheel and under the boot carpet.
DOORS
Remove door cards and fit one pad to the outer skin of each door. These are included free of charge and we would only recommend fitting these if you are competent at removing door cards. If we are installing the kit for you these door pads WILL NOT be fitted. Please refer to our FAQS on our website.