Front Kit Pieces
200 TDI Under bonnetPuma TD4 Under bonnetLand Rover Drivers side floor pieceLand Rover Passenger floor pieceFront Kit PiecesLand Rover Series Front Kit

Land Rover Front Kit

5.00 out of 5 based on 8 customer ratings
(8 customer reviews)

£145.00£185.00

Interior Soundproofing for the front of your Land Rover

Clear selection
SKU: LRFK002. Categories: , .

Product Description

Soundproofing Land Rover models covers the following areas:

  • Bonnet Lid (NoiseKiller Vibrasorb)
  • Interior Bulkhead (NoiseKiller Adhesive Sound Barrier)
  • Bell Housing (NoiseKiller Adhesive Sound Barrier)
  • Transmission Tunnel (NoiseKiller Adhesive Sound Barrier)
  • Front Floors (NoiseKiller Sound Barrier)
  • Seat Box Front and Sides (NoiseKiller Adhesive Sound Barrier)
  • Under Seats (NoiseKiller Sound Barrier)
  • Door Pads (NoiseKiller Barrier Mat)

Engine Bay

All engine bay parts use our waterproof Noise Killer Vibrasorb material. This is self adhesive with a damping sheet to reduce bonnet vibrations and an open cell Class “0” acoustic foam to absorb engine noise. The foil facing gives a wipe clean maintenance surface which also protects the bonnet lid against heat discolouring.

A Noise Killer Acoustic Engine Blanket can also be used to further suppress engine noise.

If you are taking your engine out then Noise Killer Lead Sandwich can be applied to the bulkhead to block and reduce the engine noise transmitted through the bulkhead.


Interior Cab

Noise Killer Adhesive Sound Barrier  is used to cover the transmission tunnel, bulkhead, bell housing coverings, front and sides of the seat boxes in the front cab, and Noise Killer Sound Barrier  is used for the front floors and under the front seats.

YOU WILL BE ASKED ABOUT YOUR VEHICLES MAKE/MODEL/YEAR ETC WHEN IN THE PAYMENT CART.

In a kit you will receive cut parts of different exclusive soundproofing materials depending on your specific vehicle type. All parts are numbered which coincides with a fitting/instruction guide explaining where that part goes. If necessary the parts will have an adhesive layer which you simply peel the backing paper off to adhere.
Noisekiller kits are unique in that not one material simply covers the whole vehicle. Materials have been specially designed dependant on various factors to reduce the different types of unwanted vehicle noises. In a full kit you would normally receive at least 3 different types of soundproofing material.
No, we can supply part kits for different areas e.g. engine bay only, but the best sound proofing result is gained by fitting a full kit. You also receive a saving when purchasing a full kit as opposed to buying each section individually.
Our professional experienced installers can fit kits in 2 to 3 hours, so if you add 2 more hours max to fit yourself that would be ample.
Some vehicles have a black cover clipped onto the bonnet lid. This cover isn’t soundproofing and is designed to stop your bonnet lid from discolouring. Our NoiseKiller Vibrasorb material adheres to the single skin areas on your bonnet lid. You can then replace this black cover afterwards if you wish.
No extra adhesives/fixings are needed when you purchase a kit. If any part is designed to be stuck, it will have a strong adhesive layer.
An engine blanket is a product designed to get as close as possible to the noise source (i.e. the engine!) to reduce the sound immediately. It comprises of a layer of lead, inside two layers of open cell acoustic foam with a high temperature fortaglass outer material capable of withstanding temperatures of up to 350⁰. Brass eyelets are inserted in all four corners and releasable cable ties supplied for fixing in position.
NO, you do not enclose the engine inside a blanket. The Blanket is designed to be carefully positioned to deflect and absorb different noises above the engine and behind (bulkhead area) only. Once fitted, there is still plenty of air flow around the engine and the blanket does not restrict any of the engines cooling systems.

Stocked items* will normally be despatched in 1-2 days of cleared payment. Main Land UK Items will be sent using UK Mail next day service (Max. Parcel weight is 30kg)

(* = Stocked items include all materials, engine blankets, corrosion X, clutch claws and security posts)

Soundproofing Kits can take up to 7-10 working days dependant on the work load at time of order.

However, we try wherever possible to work around your schedule, and if you’re in a hurry for the goods please mention when ordering and we can see what can be done.

Additional Information

Weight17 kg
Variations

INCL. Underbonnet, NO Underbonnet

8 reviews for Land Rover Front Kit

  1. 5 out of 5

    :

    Hi Grant,

    I received the Bell Housing Blanket in good order.
    I’ve installed it and the result is very good. (I combined it with the engine blanket and with the interior soundproofing)
    All the mechanics of my local Land Rover dealer (Metropool Noord in Antwerpen) wanted to test-ride my car, so I made some publicity for your company 🙂

    If you need a ‘reference Defender 110 TD4’ for the area where I live, just let me know!

    To continue the good work I would like to install the Lead Sandwich on parts of the underside of the body (exterior bulkhead, exterior transmission tunnel etc), mostly outside areas that are not directly exposed to water and dirt.

    Regards, Chris Goris

  2. 5 out of 5

    :

    Hi, I have only managed to fit the cab section (time restraints) of the Noisekiller kit, but what a difference

  3. 5 out of 5

    :

    Thanks Steve, fitted the kit last weekend and was very impressed! It has reduced many of the body vibrations, road and exhaust noises. Easy to fit with pre-cut pieces

  4. 5 out of 5

    :

    Dear “NK Noise Killer “,

    hereby the comments of a VERY satisfied customer after a “test period” of nearly
    6 months now. I purchased one of the last Defender TD5’s and it was a bad sur-
    prise that it was a “loud machine” 🙂

    Thinking about the sound proofing I bought years ago to make a RR Classic more
    comfortable I ordered some square meters of the noise killer mats at your company.

    Well, after fitting the mats under the upholstery it was an amazing difference, noise
    reduction is really unbelievable and I have no idea why Land Rover doesn’t use
    the noise killing mats on their new Defender’s ?

    Pro’s: *very cheap compared to the products I used before.
    *easy to cut and no dust or other spills !
    *glue is SUPERB, when fitting I realised to be carefull, when the
    mat is on it’s place it will stay there for ever.
    *noise reduction of at least 40% according to the measurements
    we did with a ( industrial and calibrated ! ) decibel meter.
    *water resistent, this is one of the best points when driving a Defender 🙂
    *under bonnet noise reduction set: fitted perfecly.
    *instructions very clear.
    *last but not least: fast delivery and well packed for a VERY nice
    price. ( Important for a Dutchman 🙂

    Contra’s : till now none and this was the third set I used on my Land Rover car’s. I am sure my next Defender will become a noise killer set of your brand !

    Best regards from J.W. Meesen.
    ( the Netherlands ).

  5. 5 out of 5

    :

    After installing your front kit in my V8 110 hard-top the transformation was remarkable. The harshness and vibration was reduced so well that I can now hear and enjoy the radio at motorway speeds, and my kids in the back don’t complain about noise.

    I had bought some closed cell foam for the rear and stuck this in, however, when I received the NK Kit, I realised this was in a another realm and it made the foam seem like a pointless exercise. The NK material is heavier and instantly reassuring, despite being slimmer than the foam. In addition, it was very quick to fit as everything was already cut to fit the majority of panels.

    The advice I received on the correct kit for my 110 V8 was spot on, the adviser on the phone had excellent knowledge of the product.

    As my defender is a V8 there was some cutting required to get it to fit around the gearbox tunnel. However, the glue was excellent so I could cut as needed and still achieved a nice appearance.

    I plan to come back for more as I continue to insulate the interior.

  6. 5 out of 5

    :

    Awesome, thanks Steve for a great service. I’ll make sure I pass the word around as soon as I receive it ??. See if I can generate a few referrals.

    Rich…

  7. 5 out of 5

    (verified owner):

    Just been for a test drive after installing the front kit. The difference is amazing – no longer do I need to shout at my passenger, music can heard clearly, it’s made a big difference. Delivery was prompt and installation was very easy. Will be highly recommending to all my friends in the Land Rover community.

  8. 5 out of 5

    :

    I am a very satisfied customer, comfort of my Defender 90 increased with 100%

    after fitting your sound kit 🙂 .

Add a review

* Checkbox GDPR is required

*

I agree