Front Kit Pieces
Puma TD4 Under bonnet200 TDI Under bonnetTD5 UnderbonnetFront Kit PiecesLand Rover Drivers side floor pieceLand Rover Passenger floor pieceRear SectionLand Rover Rear Floor pieceLand Rover Rear Section

Land Rover Full Soundproofing Kit (USA Only)

£354.00£499.00

Full Land Rover Soundproofing Kit covering Under bonnet, Interior, Door Skins and Rear Sections up to window level. 

SWB £354, LWB S/Wagon or Utility £403 or LWB VanType £416, Incl Shipping to USA

Clear selection
SKU: LRFSK006B. Category: .

Product Description

Full Soundproofing Land Rover Kits cover the following areas:

  • Bonnet Lid (NoiseKiller Vibrasorb)
  • Interior Bulkhead (NoiseKiller Adhesive Sound Barrier)
  • Bell Housing (NoiseKiller Adhesive Sound Barrier)
  • Transmission Tunnel (NoiseKiller Adhesive Sound Barrier)
  • Front Floors (NoiseKiller Sound Barrier)
  • Seat Box Front and Sides (NoiseKiller Adhesive Sound Barrier)
  • Under Seats (NoiseKiller Sound Barrier)
  • Rear Wheel Arches (NoiseKiller Adhesive Sound Barrier)
  • Rear Floor/Load Space (NoiseKiller Sound Barrier)
  • Door Pads (NoiseKiller Barrier Mat)

Engine Bay

All engine bay parts use our waterproof Noise Killer Vibrasorb material. This is self adhesive with a damping sheet to reduce bonnet vibrations and an open cell Class “0” acoustic foam to absorb engine noise. The foil facing gives a wipe clean maintenance surface which also protects the bonnet lid against heat discolouring.

A Noise Killer Acoustic Engine Blanket can also be used to further suppress engine noise.

If you are taking your engine out then Noise Killer Lead Sandwich can be applied to the bulkhead to block and reduce the engine noise transmitted through the bulkhead.

Interior Cab

Noise Killer Adhesive Sound Barrier  is used to cover the transmission tunnel, bulkhead, bell housing coverings, front and sides of the seat boxes in the front cab, and Noise Killer Sound Barrier  is used for the front floors and under the front seats.

Rear Section

Floor Section – Noise Killer Adhesive Sound Barrier is used for the sides and tops of rear wheel arches and the inner wing area above the wheel arch. Noise Killer Sound Barrier  on the load space floor NoiseKiller Barrier Mat pads on Rear door

 

YOU WILL BE ASKED ABOUT YOUR VEHICLES MAKE/MODEL/YEAR ETC WHEN IN THE PAYMENT CART.

In a kit you will receive cut parts of different exclusive soundproofing materials depending on your specific vehicle type. All parts are numbered which coincides with a fitting/instruction guide explaining where that part goes. If necessary the parts will have an adhesive layer which you simply peel the backing paper off to adhere.
Noisekiller kits are unique in that not one material simply covers the whole vehicle. Materials have been specially designed dependant on various factors to reduce the different types of unwanted vehicle noises. In a full kit you would normally receive at least 3 different types of soundproofing material.
No, we can supply part kits for different areas e.g. engine bay only, but the best sound proofing result is gained by fitting a full kit. You also receive a saving when purchasing a full kit as opposed to buying each section individually.
Our professional experienced installers can fit kits in 2 to 3 hours, so if you add 2 more hours max to fit yourself that would be ample.
Some vehicles have a black cover clipped onto the bonnet lid. This cover isn’t soundproofing and is designed to stop your bonnet lid from discolouring. Our NoiseKiller Vibrasorb material adheres to the single skin areas on your bonnet lid. You can then replace this black cover afterwards if you wish.
No extra adhesives/fixings are needed when you purchase a kit. If any part is designed to be stuck, it will have a strong adhesive layer.
An engine blanket is a product designed to get as close as possible to the noise source (i.e. the engine!) to reduce the sound immediately. It comprises of a layer of lead, inside two layers of open cell acoustic foam with a high temperature fortaglass outer material capable of withstanding temperatures of up to 350⁰. Brass eyelets are inserted in all four corners and releasable cable ties supplied for fixing in position.
NO, you do not enclose the engine inside a blanket. The Blanket is designed to be carefully positioned to deflect and absorb different noises above the engine and behind (bulkhead area) only. Once fitted, there is still plenty of air flow around the engine and the blanket does not restrict any of the engines cooling systems.

Stocked items* will normally be despatched in 1-2 days of cleared payment. Main Land UK Items will be sent using UK Mail next day service (Max. Parcel weight is 30kg)

(* = Stocked items include all materials, engine blankets, corrosion X, clutch claws and security posts)

Soundproofing Kits can take up to 7-10 working days dependant on the work load at time of order.

However, we try wherever possible to work around your schedule, and if you’re in a hurry for the goods please mention when ordering and we can see what can be done.

Additional Information

Weight35 kg
Variations

Long Wheel Base Station Wagon/Utility, Long Wheel Base Van Type, Short Wheel Bases

Blankets

with discounted engine blanket, without engine blanket

Reviews

There are no reviews yet.

Be the first to review “Land Rover Full Soundproofing Kit (USA Only)”

* Checkbox GDPR is required

*

I agree