Our Noisy neighbours no more system is the best on the market for party wall soundproofing. The unwanted sound waves need to be either blocked or absorbed (ideally both!) Our first layer of NoiseKiller Adhesive Sound Barrier in the system combines blocking and absorption layers. The full system is as follows;-
Class “O” Fire Rated Adhesive Sound Barrier (10mm)
Open cell acoustic foam sandwiched inside two rigid damping sheets for maximum noise reduction.
- Open cell acoustic foam out performs any wool or fibre type layers and is excellent at absorbing high frequency sounds (i.e.. shouting, arguing, “performing”, children etc).
- The damping sheets dense mass act as a great blocker of low frequency sounds (i.e.. bass/music) There are two layers of damping sheet layers.
The battens are used for two reasons, one to provide a vital air gap between the soundproofing and acoustic plasterboard, and two, to provide a secure method of fixing the very heavy/dense plasterboard.
Acoustic Plasterboard (12.5mm)
Acoustic Plasterboard (often known as Db board) out performs any standard plasterboard in terms of acoustic noise reduction.
Total depth of system = 40.5 mm (or just less than 1 ¾ inches)
After the installation of the above layers, our plasterer will fully plaster and skim the wall so its ready to decorate (after approx 3 days drying time).
This item is for the system to be installed within an hours radius to our premises OL2 6DS. (Properties out of this threshold can be discussed but may also incur travelling expenses).
A site visit is mandatory before any installation jobs are booked in.
Any other areas that need attention may increase the price (ex. a radiator needs moving and therefore our plumber would also be needed on the day).
Other examples of areas that may need attention are; light switches, wall lights, electrical sockets, fire places, pipework, dado rails, coving etc
Each domestic installation differs massively, if may be easier to get in touch! please contact us for a quote or to discuss further.